Just because a fastener is categorized under a standard part number doesn’t mean it’s readily available. Aerospace professionals often learn—too late—that many standard part numbers aren’t stocked in real time, particularly when specific combinations of materials, coatings, or dimensions are involved. This article explores the sourcing challenges tied to standard fasteners and how aerospace teams can better navigate availability issues with support from experienced fastener suppliers like KJL Fasteners.
Standardized fasteners form the foundation of many aerospace assemblies. They’re used in everything from control systems and landing gear to structural frames and engine mounts. These fasteners are defined by detailed specifications that ensure safety, consistency, and compatibility across aircraft platforms.
Standard fasteners—such as MS, NAS, and AS types—adhere to predefined technical criteria. These specifications cover everything from the fastener’s head style, thread pitch, and tensile strength to its material composition and surface treatment.
Engineers often default to these parts, assuming their widespread use ensures availability. While these specs establish engineering requirements, they don’t reflect real-time inventory conditions. Standard doesn’t always mean common.
A variety of organizations govern aerospace fastener specifications:
These bodies maintain technical requirements, not stockpiles. Suppliers still determine what gets manufactured and stocked based on demand.
Many aerospace professionals assume that having a standard part number in hand means they’re just a phone call away from delivery. Unfortunately, this assumption often leads to procurement delays, project bottlenecks, or emergency re-sourcing efforts.
A standard spec might represent a known configuration, but that doesn’t mean it’s sitting on a shelf. Fasteners vary by:
For example, a NAS1351 screw with a unique material and an uncommon length may technically be a standard fastener, but if that exact configuration hasn’t been used in high volume before, it likely isn’t stocked by any supplier.
Stock levels are driven by demand. Aerospace fastener manufacturers prioritize production and stocking based on the volume of historic and projected orders. If you’re requesting a variant that’s rarely been ordered—despite being a standard part—it may require a custom run.
This is especially true for military aircraft retrofits or experimental aerospace programs where unusual dimensions or coatings are specified. Even if you’ve followed the drawings perfectly, aerospace fastener availability still depends on how often that spec is actually used in practice.
Navigating the realities of aerospace fastener sourcing requires a deeper understanding of the fastener landscape. Engineers and buyers need to recognize what makes aerospace fastener availability such a complex issue.
Combinations of standard attributes create thousands of potential SKUs. Just because a fastener is listed under a known spec doesn’t mean all combinations are produced.
Consider a NAS bolt made from Inconel, 2.25 inches in length, with an anodized finish and self-locking feature. While all aspects may be “within spec,” this combination might be so specific that no supplier has ever manufactured it before. In that case, it’s effectively a custom fastener—even though it has a standard part number.
Fasteners—especially those involving exotic materials or specialty finishes—can have long production lead times. Suppliers may hesitate to produce parts in small batches due to tooling costs, setup time, and raw material minimums.
This means sourcing “rare” standard fasteners often feels like ordering custom hardware. Without high-volume need, manufacturers are unlikely to produce and hold inventory for every spec permutation.
At KJL Fasteners, we specialize in solving complex sourcing issues, especially when standard fasteners aren’t available off the shelf. Our team can help you find or fabricate the exact part you need with speed, traceability, and full compliance.
The good news? Aerospace teams can avoid fastener shortages by planning strategically and partnering with the right suppliers. Here are practical steps engineers and buyers can take.
Suppliers can provide insights into which part combinations are regularly stocked versus which are considered uncommon. Engineers designing components should verify the availability of critical fasteners early in the design process and consider sourcing-friendly alternatives when
applicable.
If a fastener calls for an unusual length or material combo, check in with a supplier like KJL Fasteners to determine whether substitutions or minor tweaks can speed up sourcing.
The earlier you bring a trusted fastener supplier into the process, the better. They can flag availability concerns before designs are finalized, helping you avoid production delays or expensive rush orders.
A partner like KJL Fasteners doesn’t just fulfill orders—we actively collaborate with aerospace engineers to suggest viable alternatives or equivalents when needed.
Procurement teams should forecast needs for niche fasteners well in advance. Placing small orders for low-volume SKUs on short notice is a common recipe for sourcing stress.
Instead, work with suppliers to align ordering schedules, assess minimum order quantities, and plan stocking strategies. This proactive approach gives suppliers time to produce or source what you need without urgent lead times.
For aerospace manufacturers who require consistent access to MS, NAS, and other standard fasteners, KJL Fasteners delivers more than just parts. We deliver reliable sourcing solutions backed by industry insight, nationwide connections, and in-house manufacturing capabilities.
KJL Fasteners understands how to interpret drawings, identify spec variations, and locate or manufacture fasteners others can’t. Whether it’s an outdated MS number or a NAS fastener with a rare finish, KJL works quickly to assess alternatives or initiate production when necessary.
Our team regularly assists with sourcing hard-to-find components, particularly when other suppliers fall short.
KJL combines in-house manufacturing with a trusted national supplier network to maximize sourcing flexibility. If your part can’t be found on the shelf, KJL may be able to produce it—or procure an equivalent—faster than you expect.
This dual capability gives customers confidence that they’ll get what they need, when they need it, even when demand surges or availability tightens.
Standard specs define what a fastener should be, but they don’t guarantee it’s sitting in inventory. From rare MS military fasteners to difficult-to-source NAS fasteners, the reality is that standardization doesn’t always mean accessibility.
KJL Fasteners has the experience, network, and manufacturing capabilities to overcome sourcing challenges—fast. Whether you’re sourcing standard fasteners with uncommon specs or need help finding compliant equivalents, our team is ready to support your procurement and engineering goals.
Let us help you take the guesswork out of sourcing aerospace fasteners.
https://kjlfast.com/wp-content/uploads/2025/01/Why-Compliance-Standards-Are-Crucial-in-the-Aerospace-Manufacturing-Industry.jpg
1250
2000
Abstrakt Marketing
/wp-content/uploads/2024/07/kjlFastnersLOGO_v2.png
Abstrakt Marketing2025-01-23 05:50:192025-07-16 09:05:30Why Compliance Standards Are Crucial in the Aerospace Manufacturing Industry
https://kjlfast.com/wp-content/uploads/2025/01/Aerospace-Fasteners-vs.-Industrial-Fasteners_-Whats-the-Difference_.jpg
1250
2000
Abstrakt Marketing
/wp-content/uploads/2024/07/kjlFastnersLOGO_v2.png
Abstrakt Marketing2025-01-23 05:41:202025-07-16 09:05:31Aerospace Fasteners vs. Industrial Fasteners: What’s the Difference?
How to Validate MS/NAS Fasteners for Fastener Compliance and Traceability