Part numbers are meant to guide sourcing, not limit it. But in practice, MS and NAS part numbers don’t always point to available, compliant inventory. In this article, we’ll unpack why that happens, show how to interpret military standard fasteners more effectively, and explain how a sourcing partner like KJL Fasteners can help you go from part number to delivered product, accurately and on time.
Fastener part numbers are often treated like product SKUs. But when it comes to MS and NAS standards, what you’re referencing isn’t a physical item but rather a specification.
MS (Military Standard) and NAS (National Aerospace Standard) part numbers are not assigned by a manufacturer. They’re developed by organizations like the U.S. Department of Defense (DoD) and the Society of Automotive Engineers (SAE) to standardize critical dimensions, tolerances, finishes, and performance characteristics. The part number refers to a technical spec, not a specific part sitting on a shelf.
For example, MS24694 is a broad specification for a type of screw. It defines allowable configurations, materials, finishes, and tolerances, but it doesn’t mandate that any specific configuration be produced or stocked.
Government and industry standards assign the specifications, but they don’t ensure production. If there’s limited demand, a part might not be manufactured at all. And in many cases, multiple vendors are authorized to build a part, leading to small but critical differences depending on who produced it and when.
As a result, part number-based sourcing often leads to dead ends, partial matches, or ambiguous alternatives.
Even when a part number seems valid, several common issues can cause sourcing delays or mistakes. Understanding these risks is the first step to smarter procurement.
Many MS and NAS standards date back decades. Some part numbers still exist in documentation but are no longer in production. Others have been superseded by newer specifications, often without clear cross-references. If you’re referencing a legacy part, you may be looking for something no longer made or only produced in limited runs by niche suppliers.
Suffixes like -S, -C, or -P define critical details like corrosion resistance, plating type, or material strength. Misinterpreting or overlooking a suffix can lead to ordering a part that looks right but fails performance requirements. Not all suffixes are interchangeable, and not all variations are available at the same time.
Large OEMs and defense contractors may use modified part numbers derived from MS or NAS specs but altered to meet internal needs. In some cases, the base number is the same, but the full configuration includes proprietary adjustments that a standard distributor won’t recognize.
Hit a wall sourcing by part number? Contact KJL Fasteners to get expert help interpreting specs, sourcing alternatives, and securing certified aerospace hardware.
If part numbers don’t tell the whole story, how can engineers and buyers decode them correctly? Understanding the structure is the first step toward getting the part you actually need.
Take MS24694-S50, for example:
Each section corresponds to a spec, but alone, they don’t always provide a complete picture of the fastener’s actual properties.
Part numbers may not mention thread pitch, tolerance class, or plating thickness. But those are precisely the specs that determine whether a fastener will perform as expected. Two parts with the same MS number might have different finishes, thread fit tolerances, or even mechanical properties depending on the production batch or source.
You’ve searched every catalog. You’ve checked multiple distributors. You’ve even Googled the part number with and without the suffix, and come up empty. What now?
The part number is a starting point. What matters is the function. Identify the critical dimensions, mechanical requirements, material properties, coatings, and certifications required for your application. This clarity allows you to evaluate alternatives or equivalents, even when the original part isn’t in stock.
KJL Fasteners works directly with engineers and procurement teams to solve these sourcing roadblocks. Here’s how we can help:
Whether you’re missing key specs or just can’t find inventory, we turn the question mark into a solution.
If you source aerospace hardware, you’ve likely felt the ripple effects of the SPS Technologies fire in Jenkintown, PA. This facility was a major producer of MS and NAS fasteners. The incident earlier this year disrupted production lines across the industry and highlighted a key vulnerability: dependency on single-source suppliers for high-spec parts.
Even when a fastener part number is standard, its availability is anything but guaranteed. Supplier disruptions, material shortages, and niche manufacturing capabilities can derail even well-documented builds.
That’s why working with a partner who can adapt—through alternate sourcing, material equivalency, or certified reverse engineering—is more important than ever.
If you’re building systems where reliability is non-negotiable, your fastener supplier should do more than just check a catalog. They should help you navigate specs, decode documentation, and deliver traceable, compliant parts that match your intent.
KJL Fasteners doesn’t rely on generic search tools or drop-down menus. We know what each MS/NAS designation means—and more importantly, what it leaves out. That understanding helps you avoid delays, rework, and compliance risk.
When stock listings fail, KJL Fasteners succeeds. We support clients with legacy fastener sourcing, specialty fastener manufacturing, and custom equivalents that meet or exceed original performance specs. Our custom manufacturing capabilities help close the gap between spec and supply.
Whether you’re sourcing a standard MS part or working from a reverse-engineered print, KJL provides:
Even when the original part number falls short, quality never does.
Fastener part numbers offer a starting point, not a complete solution. Relying on them alone can lead to sourcing delays, mismatches, and compliance headaches, especially in high-stakes applications like aerospace and defense.
KJL Fasteners helps engineers and procurement teams move past the guesswork. We interpret specs, offer alternatives, and deliver certified hardware that meets your performance, documentation, and delivery needs. If the catalog comes up empty, our team is ready to step in with the answers you need.
https://kjlfast.com/wp-content/uploads/2025/08/Grade-8-fasteners.jpg 1250 2000 Abstrakt Marketing /wp-content/uploads/2024/07/kjlFastnersLOGO_v2.png Abstrakt Marketing2025-08-15 07:37:482025-09-03 09:04:59SAE Fastener Standards: How Standardization Drives Documentation Accuracy and Cost Control
https://kjlfast.com/wp-content/uploads/2025/08/Custom-Fastener-Sourcing-What-to-Do-When-Standard-Parts-Dont-Fit.jpg 1250 2000 Abstrakt Marketing /wp-content/uploads/2024/07/kjlFastnersLOGO_v2.png Abstrakt Marketing2025-08-12 08:23:452025-09-03 09:04:59Custom Fastener Sourcing: What to Do When Standard Parts Don’t Fit
https://kjlfast.com/wp-content/uploads/2025/01/Shiny-metal-aerospace-parts-after-cnc-machining-on-steel-surface-with-selective-focus-industrial-background.jpg 1250 2000 Abstrakt Marketing /wp-content/uploads/2024/07/kjlFastnersLOGO_v2.png Abstrakt Marketing2025-01-30 12:07:222025-09-03 09:05:01Top Aerospace Fastener Advancements Every Engineer Should Know
https://kjlfast.com/wp-content/uploads/2025/01/Why-Compliance-Standards-Are-Crucial-in-the-Aerospace-Manufacturing-Industry.jpg 1250 2000 Abstrakt Marketing /wp-content/uploads/2024/07/kjlFastnersLOGO_v2.png Abstrakt Marketing2025-01-23 05:50:192025-09-03 09:05:01Why Compliance Standards Are Crucial in the Aerospace Manufacturing Industry
https://kjlfast.com/wp-content/uploads/2025/01/The-Top-Challenges-in-Aerospace-Fastener-Manufacturing.jpg 1250 2000 Abstrakt Marketing /wp-content/uploads/2024/07/kjlFastnersLOGO_v2.png Abstrakt Marketing2025-01-23 05:45:532025-09-03 09:05:01The Top Challenges in Aerospace Fastener Manufacturing
https://kjlfast.com/wp-content/uploads/2025/01/Aerospace-Fasteners-vs.-Industrial-Fasteners_-Whats-the-Difference_.jpg 1250 2000 Abstrakt Marketing /wp-content/uploads/2024/07/kjlFastnersLOGO_v2.png Abstrakt Marketing2025-01-23 05:41:202025-09-03 09:05:01Aerospace Fasteners vs. Industrial Fasteners: What’s the Difference?
https://kjlfast.com/wp-content/uploads/2024/12/a-batch-of-shiny-metal-cnc-aerospace-parts-production-close-up-with-selective-focus-for-industrial-background.jpg 1250 2000 Abstrakt Marketing /wp-content/uploads/2024/07/kjlFastnersLOGO_v2.png Abstrakt Marketing2024-12-05 08:22:102025-09-03 09:05:01The Impact of Fasteners on Aircraft Performance
https://kjlfast.com/wp-content/uploads/2024/11/Side-view-of-aerospace-inspector-standing-next-to-large-turbine.jpg 1250 2000 Abstrakt Marketing /wp-content/uploads/2024/07/kjlFastnersLOGO_v2.png Abstrakt Marketing2024-11-22 06:39:282025-09-03 09:05:01How to Choose the Right Aerospace Fastener for High-Stress Environments
https://kjlfast.com/wp-content/uploads/2024/11/Top-down-view-abstract-flat-industrial-close-up-background-of-shiny-brass-metal-threaded-hexagonal-fitting-part.png 1250 2000 Abstrakt Marketing /wp-content/uploads/2024/07/kjlFastnersLOGO_v2.png Abstrakt Marketing2024-11-22 06:28:432025-09-03 09:05:01Understanding the Different Types of Aerospace Fastener Materials
Custom Aerospace Fasteners: What to Do When Standard Fasteners Fail Fit Che...